行业解决方案Industry Solutions

针对涂料、油墨与 3D 打印鞋材/柔性件三大场景，提供光源—材料—工艺一体化方案。Integrated source-material-process solutions for three scenarios: coatings, inks and 3D-printing footwear / flexibles.

涂料行业Coatings

痛点：溶剂 VOC 高、干燥慢Pain: high VOC, slow drying

无溶剂 UV 涂料 + 面光源产线，秒级表干、近零排放。Solvent-free UV coatings with area-source lines — instant surface cure, near-zero emission.

油墨行业Inks

痛点：印刷提速受限Pain: limited print speed

LED 固化油墨配合线光源，支持高速柔印/胶印，最快可达400+米/分钟。LED-curable inks with line sources enable high-speed flexo/offset, 400+m/min.

3D 打印鞋材 / 柔性件3D Printing Footwear / Flexibles

痛点：弹性与精度难兼顾Pain: elasticity vs precision

DLP/SLA 专用弹性体树脂 + 均匀面光源，鞋底与缓冲件一体成型、低收缩、耐弯折，高分辨且强韧。DLP/SLA elastomer resins with uniform area sources — monolithic soles and cushions, low shrinkage, bend-resistant, high-resolution and tough.

我们的交付方式How we deliver

需求诊断：材料、产线、设备与节拍评估。Diagnosis: material, line, equipments and takt.
配方打样。Formulation & source matching samples.
小试—中试—量产阶梯验证。Lab → pilot → mass production validation.
驻场支持与工艺持续优化。On-site support and continuous optimization.

SOURCE · MATERIAL · PROCESS

设备—材料—工艺协同，是稳定固化的关键。Synergy of equipment, material and process is key to stable curing.